Engineering high-performance polymer tile adhesives, epoxy grouts, and surface care products that elevate modern architectural construction across India.
At Global Home Care, we believe that modern architecture cannot rely on century-old methods. Today’s tiles are denser, larger, and virtually non-porous (such as vitrified porcelain and sintered slabs), making traditional cement-sand mortar incapable of creating a lasting bond.
Marketed under our flagship brand Xtracrete, our product lines replace labor-heavy, failure-prone cement practices with pre-mixed, self-curing polymer chemistry. As an ISO 9001:2015 certified company, every batch produced undergoes rigorous testing to guarantee tensile strength, zero vertical slip, and flexural resilience under extreme Indian climatic cycles.
Our mission is simple: provide architects, structural engineers, tile applicators, and homeowners with certified products that deliver zero hollows, zero tile popping, and lifetime durability.
How our German technology polymer formulations ensure structural longevity.
ISO 9001:2015 certified manufacturing protocols. Graded silica sands, premium white/grey Portland cement, and specialized cellulose ethers guarantee uniform batch consistency.
Formulated with advanced redispersible polymer powders offering S1 (>2.5mm) and S2 (>5mm) flexural deformability. Defeats thermal expansion and substrate deflection.
Every SKU meets and surpasses IS 15477:2019 and EN 12004 tensile and shear thresholds — tested under dry, wet, and heat-aging environmental simulations.
Thin-bed installation (3–12 mm) cuts dead load by over 60%, enables 2× faster daily laying rates, and completely eliminates water curing costs on site.
Rigorous laboratory checks conducted on every production batch before dispatch.
| Test Parameter | Test Methodology | Standard Benchmark |
|---|---|---|
| Pull-Off Tensile Adhesion (Dry) | Direct pull-off test on concrete substrate | Exceeds 1.0–1.7 N/mm² (IS minimum 0.5–1.5 N/mm²) |
| Shear Adhesion (Wet Immersion) | Shear test after 21 days water soaking | Exceeds 1.1–1.3 N/mm² (IS minimum 1.0 N/mm²) |
| Vertical Slip Resistance (T) | Standard comb slip gauge under 5 kg tile load | Slip < 0.40 mm (IS requirement < 0.50 mm) |
| Open Time & Adjustability (E) | Tile skinning check after 30 minutes | Full 30+ minutes extended open working time |
| Transverse Deformation (S1 / S2) | Three-point bending flexure test | Class S1: >2.5 mm | Class S2: >5.0 mm flex |