A flawless tile finish demands more than just great adhesive. Complete the system with high-polymer grout admix, residue cleaners, and precision installation tools.
Maximize durability and restore original tile luster with engineered care products.
Synthetic liquid-polymer additive used in place of water when mixing cementitious grouts. Drastically enhances compressive and bond strength, lowers water absorption, cuts joint porosity, and prevents cracking on balconies and heavy-traffic floors.
Fast-acting acid-based chemical cleaner engineered to remove cement film, grout residue, efflorescence, and hard-water stains from ceramic, vitrified, and porcelain tiles without damaging the surface glaze.
Precision tools designed for 100% full-bed transfer and zero lippage.
4 / 6 / 8 / 10 / 12 mm square notches in stainless steel. Distributes adhesive uniformly to eliminate trapped air pockets.
Rust-Proof Steel GripNon-marring dead-blow rubber core with flared handle. Firmly beds tiles into the mortar bed without cracking delicate edges.
Dead-Blow Rubber2, 3, 4, 5, 6, 8, 10 mm cross spacers. Precision-molded virgin polymer that resists compression under tile weight.
Virgin PolymerHeavy-duty levelling clips and reusable wedges. Holds adjacent large-format tiles perfectly flush until adhesive cures.
Flush Tile LockSelecting the right notch depth ensures the required 3–12 mm adhesive bed thickness.
| Tile Format / Application | Notch Size | Target Bed Depth | Technique |
|---|---|---|---|
| Mosaics & Small Ceramic (Up to 100 mm) | 4 × 4 mm | 2–3 mm | Single trowel bed |
| Standard Ceramic (300 × 300 mm) | 6 × 6 mm | 3–4 mm | Single trowel bed |
| Vitrified (600 × 600 mm, 800 × 800 mm) | 8 × 8 mm or 10 × 10 mm | 4–6 mm | Back-buttering advised |
| Large Slabs (600 × 1200 mm & 1200 × 2400 mm) | 12 × 12 mm | 6–12 mm | Mandatory back-buttering + levelling wedges |